Miranda RCP-200 Bedienerhandbuch PDF herunterladen (Seite 41)

GUIDE TO INSTALLATION AND OPERATION

RCP-200 | 37

Scrollable lists These are like multi-value lists, except that the control area is not tall

enough to display all the available values.

• Blue arrows above and below indicate that additional values are

available in that direction.

• The arrow is white when there are no additional values in that

direction

Turn the control knob to move up and down the list (see note * below).

• The selected value is shown on a LIGHT BLUE background

• Non-selected items are on a DARK BLUE background

Sliders A slider consists of a scale and a movable indicator.

• The upper and lower limits, and the nominal value, are shown on the

left side of the slider graphic.

• The nominal value is the User default value if it exists or the factory

value otherwise.

• The arrow head indicating the current value is displayed on the right

side of the slider graphic.

• Beneath the slider is a data box giving the numerical value of the

current scale setting.

The value can be changed using the control knob:

• Turn the knob clockwise to increase the value

• Turn the knob counter-clockwise to decrease the value

Sliders may also display nominal Factory or User Default values, if that

feature is available and enabled for the device under control.

• The slider will display a user-specified default value plus a tolerance

window around that value

• The slider bar within the tolerance window will be green by default.

• The slider bar outside the tolerance window will be yellow by default.

• The color of the numbers in the text box below the slider will match the

color of the region of the slider where the displayed value is located;

i.e. they will be green if the value is within the tolerance window, and

yellow if it is outside the tolerance window

See section 4.9.4 for a full discussion of the User Defaults feature.

Note* - the user may select the direction of rotation for the control knobs when scrolling through lists.

To select the direction of rotation:

• Press the CONFIG button between the two screens.

• In the Right Hand screen, select CONTROL - KNOBS

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48 49

Keine Kommentare

Miranda RCP-200 Bedienerhandbuch Seite 41