Miranda KS-900 Bedienerhandbuch PDF herunterladen (Seite 28)

GUIDE TO INSTALLATION AND OPERATION

24 | Kaleido-Solo

The OSD ALMs indicate which audio pair is being monitored. A grey marker at the bottom of the ALM shows the

selected pair. In this example the audio pair 1-2 is selected. If downmix or off is selected no grey marker is present.

Audio HDMI

Choose whether to send the audio channels selected for monitoring to the HDMI port.

Stereo

Enable stereo audio insertion in HDMI. The selected stereo pair is selected by the Output Stereo

Selection configuration.

5.1 no.1

Enable 5.1 audio insertion in HDMI. The selected channel are define in section 5.4.2.

5.1 no.2

Enable 5.1 audio insertion in HDMI. The selected channel are define in section 5.4.2.

Off

Disable audio insertion in HDMI (this could help with some monitors that does not support

compressed audio).

Volume (Analog)

Adjust the volume of the Kaleido-Solo‟s analog audio output.

0 dB

The input level is unchanged.

...

-96 dB

The input level is attenuated.

Note that the audio output volume can also be adjusted by pressing the UP and DOWN keys when you

are in normal operation (i.e. menu not displayed).

Delay (SPDIF/Analog)

Delay can be added to the SPDIF and analog audio outputs, to compensate for a monitor video delay, so that the

audio timing can be matched to the video for lip sync. This control does not affect the audio inserted in the HDMI port.

Using the lip sync test signal (see section 5.2) will help when making this adjustment.

From the Delay (SPDIF/Analog) menu, press ENTER. The main menu disappears and only the adjustment slider

remains visible. This ensures that the test signal or video that is being used to adjust the audio delay is not obscured

by the menu.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 91 92

Keine Kommentare

Miranda KS-900 Bedienerhandbuch Seite 28